Awasome Rv Water Heater Anode Socket Size Ideas
Awasome Rv Water Heater Anode Socket Size Ideas. If you have an atwood water heater it may just be a drain plug and not an anode. Make sure there is no pressure in the water heater by opening the pressure relief valve located toward the top of the water heater.
Compatible with all suburban rv water heater (d, de, del, dem models). The socket size you will need has to be 15/16ths to fit the head. Rv anode rods are typically a standard size.
Size 9 ¼’’ Length And ¾’’ Npt Thread;
Flared compression elbow dr brass 15 fi x 15 c watermarked pn. The life of your water heater tank. Rv anode rods are typically a standard size.
Compatible With All Suburban Rv Water Heater (D, De, Del, Dem Models).
However, two other common sizes included 7/8” and 13/16”. As soon as the anode rod is depleted and fully decayed, the water heater begins to rust, then crack, fail and leak. Magnesium, stainless steel (steel cap) rinser:
What Size Are Rv Water Heater Plugs?
They make them to fit both atwood (dometic) and suburban so you can get the 7/8 or the 15/16” size from that company. Designed to properly the all common size electric heater elements, this socket’s opening will snugly fit the hex end. Flared compression elbow lugged extended 15.
If You Have An Atwood Water Heater It May Just Be A Drain Plug And Not An Anode.
However, there are others too. 1 rv water heater tank rinser, 2 rv water heater anode rods, 1 teflon tape material: What i did was put the adjustable wrench on it and put a screwdriver through the hole at the end of the wrench to turn it.
Be Sure To Use A 1/2 Drive Socket, An Extension (6 To 12) And A Long Handled Socket Wrench Or Better Yet, A Breaker Bar If You Have One.
If your water tank is big, you will need to use sockets that are bigger. Anode rod head with sockets. Size 9 ¼’’ length and ¾’’ npt thread;
Post a Comment for "Awasome Rv Water Heater Anode Socket Size Ideas"